SKU 66804
For technical questions, please call 1-800-444-3353.
Page 3
Do not use on high-impedence cir-
6.
cuitry.
Hold the probes with fingers behind
7.
guards.
Observe work area conditions. Do not
8.
test voltages in damp or wet locations.
Don’t expose to rain. Keep work area
clean and well lit.
Keep children away. Children must
9.
never be allowed in the work area.
Stay alert. Watch what you are doing,
10.
use common sense. Do not operate
any voltmeter when you are tired.
Do not operate Test Light/Voltmeter if
11.
under the influence of alcohol, medi
-
cation, or drugs. Read warning labels
on prescriptions to determine if your
judgment or reflexes are impaired
while taking drugs. If there is any
doubt, do not operate the Voltmeter.
WARNING: The brass components of
12.
this product contain lead, a chemical
known to the State of California to
cause birth defects (or other repro-
ductive harm). (California Health &
Safety code § 25249.5, et seq.)
Store idle equipment. When not in
13.
use, Test Light/Voltmeter must be
stored in a dry location. Lock up the
tool and keep out of reach of children.
Dress properly. Protective, electrically
14.
nonconductive clothes and nonskid
footwear are recommended when
working. Remove any metal items
such as jewelry before working with
electricity.
Wear ANSI-approved impact safety
15.
goggles.
Only use accessories supplied with
16.
this meter.
The warnings, cautions, and instruc-
17.
tions discussed in this instruction
manual cannot cover all possible con-
ditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
Avoid damaging the Test Light/Volt-
18.
meter. Use only as specified in this
manual.
Have the Test Light/Voltmeter cali-
19.
brated by a qualified technician every
year. A voltmeter that is not calibrated
yearly will not yield accurate results.
SaVe theSe
inStructionS.
