Bedienungsanleitung / Exercise Monitor Instruction
Bedienungsanleitung für das Cockpit
Instruction manual for the console
NOTE
:
1. If the display is faint or shows no figures, please
replace the batteries.
2. The monitor will automatically shut off if there is no
signal received after 4 minutes.
FUNKTIONEN DER ELEKTRONISCHEN UHR:
FUNKTIONSTASTEN:
MODE - Drücken Sie diese Taste, um Funktionen auszuwählen.
SET - Zum Einstellen der Verbraucherbewegung von
Zeit, Entfernung und Kalorien.
RESET - Zum Zurücksetzen der Verbraucherbewegung
von Zeit, Entfernung und Kalorien.
FUNKTION UND BETRIEB:
1. ZEIT:
(1) Zählen Sie die Gesamtzeit vom Beginn bis
zum Ende des Trainings.
(2) Drücken Sie die Taste "MODE", bis "TIME" angezeigt
wird, und drücken Sie die Taste "SET", um die
Trainingszeit einzustellen. Zählen Sie während des
Trainings automatisch vom Zielwert herunter.
2. COUNT:
(1) Zählen Sie die Anzahl von Trainingsbeginn
bis Trainingsende.
(2) Drücken Sie die Taste "MODE", bis "COUNT"
angezeigt wird. Drücken Sie die SET-Taste, um die
Trainingsentfernung einzustellen. Zählen Sie während des
Trainings automatisch vom Zielwert herunter.
3. ENTFERNUNG:
(1) Zählen Sie die Entfernung vom Beginn bis zum Ende
des Trainings.
(2) Drücken Sie die Taste"MODE", bis "DIST" angezeigt wird.
Drücken Sie die SET-Taste, um die Trainingsentfernung
einzustellen. Zählen Sie während des Trainings automatisch
vom Zielwert herunter.
4. COUNT / MIN (RPM):
Ermittelt automatisch die Trainingsanzahl pro Minute.
5. KALORIEN:
(1) Zählen Sie die Gesamtkalorien vom Beginn bis zum
Ende des Trainings.
(2) Drücken Sie die Taste "MODE". Die Anzeige "CAL"
erscheint. Drücken Sie die SET-Taste, um die
Trainingskalorien einzustellen. Zählen Sie während des
Trainings automatisch vom Zielwert herunter.
HINWEIS:
1. Wenn das Display schwach ist oder keine Zahlen
anzeigt, tauschen Sie bitte die Batterien aus.
2. Der Monitor schaltet sich automatisch aus, wenn
nach 4 Minuten kein Signal empfangen wird.
FUNCTIONS OF THE EXERCISE MONITOR
:
MODE - To select the Monitor functions
SET - To enable you to set exercise targets of
Time, Distance and Calories
RESET - To set to zero any function.
1. TIME
(1) Will show the time from start to finish.
2. STROKE COUNT
(1) Will count the number of strokes from start
to finish
(2) Press “MODE” button until “TIME” appears,
press "SET" button to set stroke count.
This will automatically count down from your
set target in use.
3. DISTANCE
(1) Will show the workout distance from start
to finish.
(2) Press “MODE” button until “DIST” appears.
Press "SET" button to set distance.
This will automatically count down from your
set target in use.
4. COUNT/MIN(RPM) : Accumulates total stroke
count during use.
5. CALORIES
(1) Will show the workout total calorie burn from
start to finish.
(2) Press “MODE” button unit “CAL” appears.
Press "SET" button to set calories.
This will automatically count down from your set
target in use.