Aufbau / Assembly
3.
Lösen Sie die Achse (G) und ziehen Sie den
hinteren Stabilisator (31) wie abgebildet heraus.
Dann sperren Sie die Achse (G) fest mit 2 x Kissen
(E) und 2 x Schraube (F).
Montieren Sie den Sattel (46) auf die Hauptschiene
(36).
If not pre-fitted, remove the Axle (G) from the Rear
Stabilizer (31) then line up and insert the end of
the Rear Stabilizer into the rear of the Main Rail
(36) and secure in place using 1 x Stopper (E)
and 1 x M8 x 25mm Bolt (F) on each side.