U-Line ADA SERIES, Use And Care Manual

Page: 5 / 16

ADA15IM 3
ADA SERIES
Model ADA15IM Ice Maker
The ADA15IM Ice Maker will produce and store up to 25
lbs (11.3 kg) of ice per day. It conserves on water, using
only 2-3/4 gallons (10.4 L) to produce approximately 22 lbs
(10 kg) of ice, and features a clear removable ice bucket.
Manual defrosting will be occasionally required.
Exclusive Features
• All black solid door models accommodate custom flat
or raised door panels, and can achieve a custom, built-
in look by matching surrounding cabinets. Please visit
www.u-line.com for additional panel information.
• Doors on black models are field-reversible. Stainless
steel doors are not field-reversible.
• Door locks are factory-installed.
• Vinyl clad steel cabinets provide a rich textured look,
and resist scratching, peeling, or flaking.
• Available in stainless steel, and feature a stainless steel
door panel and hinges with black cabinet and grille.
• Features and specifications are subject to change
without notice.
Figure 1
IMPORTANT IMPORTANT
Proper air flow (Figure 1) is required for your unit to
operate at its highest efficiently. A grille, located in
the base of the unit, must not be blocked at any
time, or your unit will not perform.
Initial Startup
All U-Line units are shipped with controls that are preset.
No initial adjustments are required.
IMPORTANT IMPORTANT
It is possible that dirt or scale will dislodge in the
water line. Always throw away all ice cubes made
during the first two to three hours of operation.
Open the door to access the power switch. It is located on
the lower front panel
(Figure 1, 1) .
Depress the ON/OFF switch as required to turn the unit on
or off.
Temperature Control
Adjusting Temperature
Many factors can affect the internal temperatures of the
cabinet. They include:
• Temperature setting.
• Ambient temperature where installed.
• The number of times and length of time the door is
opened and closed.
• Installation in direct sunlight or near a heat source.
To adjust the temperature setting:
1. Remove the front grille (two screws) (Figure 1, 2) .
3 Product Features 4 Operation