U-Line ADA SERIES, Use And Care Manual

Page: 12 / 16

10 ADA15IM
ADA SERIES
Figure 12
5. Remove screws on opposite side of cabinet (Figure 13) .
Note that there may be a nut behind one or both
screws on either side.
Figure 13
6. Install hinge on opposite side, bottom of cabinet
(Figure 14) . Replace nut on back side where installed.
Align hinge outer edge with cabinet before tightening
screws.
Figure 14
7. Relocate plastic spacer/bushing (Figure 15) on bottom
of door to opposite side, and place door on bottom
hinge pin. Clean out bushing hole in door bottom with
a screwdriver if necessary.
Figure 15
8. Remove plastic hole plug (Figure 16) from door handle
and relocate on opposite side.
9. Remove pivot screw from top hinge, invert screw and
reinstall pivot screw in top hinge. See Figure 29 .
ULIN_0122 _A
1
ULIN_0109_A
Plastic
Plug Hole
Plastic
Plug Hole
Hinge
Screw
Right Side
Door Swing
Right Side
Hinge
Invert
Screw
Invert
Hinge
Left Side
Door Swing
ULIN_0142_A