U-Line 3024BEV User Manual Download Page 27

Page: 27 / 74

SAFETY • INSTALLATION & INTEGRATION •

OPERATING INSTRUCTIONS

• MAINTENANCE • SERVICE

USER GUIDE

u-line.com

Sabbath Mode

This unit offers a Sabbath mode for users who require

this functionality during Sabbaths. Sabbath mode
disables system responses to user initiated activities
and all external functions, including lighting, display
and audible alarms. The unit will still maintain internal
temperatures and set points.

To enable Sabbath Mode:

Open the unit’s door to activate the display.

To access the Customer Menu, hold for 5
seconds.

Press

to scroll through available

selections.

Select Sabbath Mode from the Customer Menu by
pressing

Press

to select “Off”.

Press

. “Off” will begin to flash.

Press to change “Off” to

“On”.

Press

to confirm your selection.

The Display will fade out as the unit enters Sabbath

Mode. Sabbath

Mode remains active until is quickly pressed and

released.

Sabbath Mode 1

Select

Down

RETURN TO MENU

SABBATH MODE

OFF?

Summary of Contents for 3024BEV











































































Search results

Summary of Contents for 3024BEV

Reviews:

Related manuals for 3024BEV

Brands by name

Popular brands

U-Line 3024BEV, User Manual

Search results

Summary of Contents for 3024BEV

Reviews:

Related manuals for 3024BEV

Brands by name

Popular brands