SAFETY • INSTALLATION & INTEGRATION •
OPERATING INSTRUCTIONS
• MAINTENANCE • SERVICE
Control Operation 3
USER GUIDE
u-line.com
1.
To begin, press to enter the lighting menu.
2.
Press
to cycle through each available
brightness setting (Low, Medium or High).
3.
Press to cycle through each available timer
setting. Selections include “On With Door”, “On 3
Hours”, “On 6 Hours”, or “On 24 Hours”.
4.
To exit, press or simply wait for the menu to
time out.
Error Notification
The 3000 model series continuously monitors a series
of inputs and parameters to ensure proper and
efficient operation of your unit. Should the system
detect a fault, an error notification will be displayed
on the user interface. See below for a list of errors.
NOTE: Singe zone models will not use (L) left or (R)
right zone indicators in error notification.
ID
Description
Solution
No Comm
Unit lost
communication to
the display.
Disconnect
and
reconnect power to
unit.
Contact
Customer Care if
persistent.
(L) (R) Zone T
Open
Left or right zone
thermistor circuit
open.
Contact Customer
Care.
Amb
Thrm
Open
Ambient thermistor
circuit open.
Contact Customer
Care.
(L) (R) Zone T
Short
Left or right zone
thermistor circuit
shorted.
Contact Customer
Care.
Amb
Thrm
Short
Ambient thermistor
circuit shorted.
Contact Customer
Care.
(L) (R) Temp Hi
6H+
Left or right zone
tempe10°
over set point for
over 6 hours.
Verify door is closed
and sealing. Contact
Customer Care if
persistent.
(L) (R) Temp Hi
12H+
Left or right zone
tempe10°
over set point for
over 12 hours.
Verify door is closed
and sealing. Contact
Customer Care if
persistent.
(L) (R) Temp Lo
6H+
Left or right zone
temperature
-10°
under
set
point for over 6
hours.
Verify door is closed
and sealing. Contact
Customer Care if
persistent.
(L) (R) Temp Lo
12H+
Left or right zone
temperature
-10°
under
set
point for over 12
hours.
Verify door is closed
and sealing. Contact
Customer Care if
persistent.
(L) (R) Door
Open 5M
Left or right door
switch open for
more then 5
minutes.
Verify door is closed
and sealing. Contact
Customer Care if
persistent.
CUSTOMER MENU
The 3000 Series of U-Line undercounter refrigeration
appliances contains a feature rich customer menu.
The Customer Menu allows access to a series of
advanced features including Energy Saver Mode,
Sabbath Mode, actual temperature readings as well a
method to restore factory defaults.
3000 Series - Customer Menu
1.
To access the Customer Menu hold for 5
seconds.
2.
Press to scroll through
available selections.
3.
Press
to enter selected sub-menu.
4.
To exit Customer Menu, press
to scroll to
the bottom of the display and press to select
“Exit”.
or
or
