Configuration Guide
Leviton Dimensions 4000 Series Architectural Lighting Controller
Page 64
OPERATION
SETUP
QUICK START
OV
ERVI
EW
CONFIGURATION
Step 8:
Press the
Up
and
Down
buttons to select
another Event and repeat all steps until all Events
have been programmed.
Step 9:
Press the
Menu/Cancel
button when you are
finished editing events.
•
You return to the
VIEW SCHEDULE?
menu command.
The LCD display times out and returns to
MANUAL
MODE
if no changes are made for 60 seconds.
Enabling the Scheduler
To enable or disable the scheduler:
Step 1:
Press the
Menu/Cancel
button.
Step 2:
Press the
Up
and
Down
buttons until
SCHEDULER=
flashes on the LCD display.
Step 3:
Press the
Select/Save
button.
•
The current status of the scheduler flashes.
Step 4:
Press the
Up
and
Down
buttons to change
the value.
Step 5:
Press the
Select/Save
button to save the value.
Step 6:
Press the
Menu/Cancel
button to exit this menu.
Viewing Scheduled Events
To view currently scheduled Events:
Step 1:
Press the
Menu/Cancel
button.
Step 2:
Press the
Up
and
Down
buttons until
VIEW
SCHEDULE?
flashes on the LCD display.
Step 3:
Press the
Select/Save
button.
•
Scheduled Events are displayed in the same format as
for editing above.
Sequencer
The sequencer causes Scenes to be activated in a timed
sequence. The sequence may be programmed to run once or
continuously in a loop. The sequence can be activated manually
(preset/scene buttons) or by the event timer (scheduler). The
