Page 55
Changing the MAX and OFF Lighting
Levels
Reducing the maximum output voltage to the lamps by 5% can
extend lamp life significantly. This can be valuable when
incandescent lights are located where it is difficult to replace
them.
To change the MAX lighting level:
Step 1:
Press the
MAX
button.
•
The lighting levels fade to the current maximum level.
Step 2:
Using the Zone
Up
or
Down
buttons beneath
the LCD display to adjust each zone to the maximum
value that you need.
Step 3:
Press and hold the
MAX (or OFF)
button to record
the scene and set fade times just like you would
scenes 1-16.
When the Double Bump feature is on, tapping the
MAX or OFF buttons twice overrides any high and low
limits. Therefore, if MAX and OFF are set at any
levels other than full bright and full off, the Double
Bump feature should be turned off.
Zone Labels: Naming a Scene or Zone
You can program alphanumeric labels with up to
14
characters
for any
Scene
MAX
,
OFF
or
Zone
ID buttons.
To name a Scene or a Zone:
Step 1:
Press the
Menu/Cancel
button.
Step 2:
Press the
Up
and
Down
buttons until
EDIT
LABELS?
flashes on the LCD display.
Step 3:
Press the
Select/Save
button.
Step 4:
Press the
SCENE
,
MAX
,
OFF
, Zone ID or
Up
or
Down
button you want to edit.
Step 5:
Press the
Left
and
Right
buttons to select a
character to edit,
or proceed to the next step if you want to change the
current character.
