Page 61
Overriding a Lock
If the control station is locked by a code number, the LCD displays
ENTER CODE
when a locked operation is attempted.
To override a lock:
Step 1:
Press the
Up
and
Down
buttons to enter
the programmed code number (000-999).
•
Press
Clear
to begin entering numbering from zero (0).
Shortcut: Use a code number between 000 and 999,
as the Preset - Scene buttons 1 to 8 and MAX (9) and
OFF (0) can be used to enter the code directly.
Step 2:
Press the
Select/Save
button to enter the value.
•
The originally selected operation begins and the unit
remains unlocked for approximately 5 minutes.
The PIN 6 key lock input on the Luma-Net connector
always locks the station overriding the station lock
and there is no “Pass Code” to override this lock.
