LEXI-R422 - System integration manual
UBX-23007449 - R02
Design-in
Page 56 of 108
C1-Public
Manufacturer
Part number
Description
Taoglas
MA241.BI.001
GSM / WCDMA / LTE MIMO 2in1 adhesive-mount combination antenna
waterproof IP67 rated with cable and SMA(M)
698..960 MHz, 1710..2170 MHz, 2400..2700 MHz
205.8 x 58 x 12.4 mm
Taoglas
GSA.8827.A.101111
Wideband I
–
Bar adhesive mount IP65 antenna with cable and SMA(M)
698..960 MHz, 1575.42 MHz, 1710..2700 Mhz
105 x 30 x 7.7 mm
Taoglas
GSA.8835.A.101111
Wideband I
–
Bar adhesive mount IP67 antenna with cable and SMA(M)
698..960 MHz, 1575.42 MHz, 1710..2700 MHz
105 x 30 x 7.7 mm
Laird Tech.
CMS69273
GSM / WCDMA / LTE ceiling-mount antenna with cable and N-type(F)
698..960 MHz, 1575.42 MHz, 1710..2700 MHz
86 x Ø 199 mm
Laird Tech.
OC69271-FNM
GSM / WCDMA / LTE pole-mount antenna with N-type(M)
698..960 MHz, 1710..2690 MHz
248 x Ø 24.5 mm
Pulse Electronics
SPDA24617/3900
Multiband swivel dipole antenna with SMA(M)
617..960 MHz, 1400..2700 MHz, 3200..3900 MHz
223.24 x 56.13 x 10.97 mm
AMOTECH
ACA556022-S0-A1
Low-profile, screw-type LTE/Sub6G antenna, Waterproof IP67
699..3800 MHz
80.0 x 60.0 x 22.5 mm
AMOTECH
ACA556022-S0-A2
Low-profile, adhesive-type LTE/Sub6G antenna, Waterproof IP67
699..3800 MHz
55.0 x 60.0 x 22.0 mm
AMOTECH
ACAD6623-S0-A1
Low-profile, roof-mount LTE/Sub6G antenna, Waterproof IP67
699..3800 MHz
23.0 x Ø 60.0 mm
Table 22: Examples of external antennas
2.4.1.6
Antenna trace design used for LEXI-R422
modules’ type approvals
The conformity assessment of u-blox LEXI-R422 LGA surface-mounted modules for regulatory type
approvals such as FCC United States, ISED Canada, RED Europe, etc. has been carried out with the
modules mounted on a u-blox host printed circuit board (PCB) with a 50
grounded coplanar
waveguide designed on it, herein referenced as “antenna trace design”
. The antenna trace design
implements the connection of the
ANT
LGA pad of the module, which is the cellular RF input/output
of the module, up to a dedicated 50
SMA connector, which is the cellular RF input/output of the host
PCB for external antenna and/or RF cable access.
☞
Manufacturers of mobile or fixed devices incorporating LEXI-R422 modules are authorized to use
the FCC United States Grants and ISED Canada Certificates of the modules for their own final host
products if, as per FCC KDB 996369, the antenna trace design implemented on the host PCB is
electrically equivalent to the antenna trace design implemented on the u-blox host PCB used for
regulatory type approvals of the modules, described in this section.
☞
In case of antenna trace design change, an FCC Class II Permissive Change and/or ISED Class IV
Permissive Change application is required to be filed by the grantee, or the host manufacturer can
take responsibility through the change in FCC ID and/or the ISES Multiple Listing (new application)
procedure followed by an FCC C2PC and/or ISED C4PC application.
The antenna trace design is implemented on the u-blox host PCB as illustrated in
, using the
parts listed in
, with the support of the additional optional antenna detection capability.
