TYROLIT Hydrostress SK-SD, Operating Instructions & Spare Parts

Page: 52 / 66

Operation Operating Instructions
5-4 SK-SD / 007
5.1.4 Controls
5.1.4.1 Drive unit
The wire saw SK-SD is operated using a drive unit. Information on
connection and on the individual operations can be found in the Operating
Instructions of the drive unit.
Example: LH drive unit
Fig. 5-1 Drive unit with remote control
1 Drive unit LH
2 Remote control
5.1.5 Safety-related operator’s controls
5.1.5.1 Diamond wire guard
The diamond wire guard is a safety device. It provides protection from
accidental contact with the cutting tool and from flying parts and at the
same time acts as a spray guard. Working without the diamond wire guard
is prohibited.
5.1.5.2 Emergency Stop pushbutton
Example: LH drive unit remote control
Fig. 5-2 Emergency stop
In danger situations the Emergency Stop pushbutton must be pressed
immediately. Pressing the Emergency Stop pushbutton immediately halts
the system and prevents the system being accidentally switched on again.
2
1