TYROLIT Hydrostress SK-SD, Operating Instructions & Spare Parts

Page: 35 / 66

Operating Instructions Assembly / disassembly
SK-SD / 007 4-1
4 Assembly / disassembly
4.1 Assembly / disassembly of the saw system
4.1.1 General
Before proceeding, first of all read Chapter 2 "Safety instructions", 2-1 in
these Operating Instructions. Be sure also to take note of all the danger
information given here and follow the instructions on how to avoid physical
injury and damage to property.
4.1.2 Safety instructions
It is essential to observe the following safety instructions, in particular in
relation to the assembly/disassembly of the wire saw SK-SD.
Information
In order to be able to use the wire saw SK-SD correctly (see "Chapter 1"
1.1.2,
1-2), it must have other system components added in order to
form a complete saw system (see "Chapter 3" 3.1.1, 3-1).
Danger
Danger of falling heavy parts.
When performing the types of work described in this chapter, it is
absolutely essential to wear the following personal protective
equipment: helmet, goggles, protective gloves and safety shoes.
It is essential that the work instructions and procedures described
in these Operating Instructions are followed.
Failure to observe this regulation may lead to serious physical
injury, possibly even death, and to property damage.