TYROLIT Hydrostress SK-SD, Operating Instructions & Spare Parts

Page: 64 / 66

Servicing and Maintenance Operating Instructions
6-8 SK-SD / 007
6.3 Warranty
TYROLIT Hydrostress AG Guarantees that the system supplied is free
from material and manufacturing defects. For the undertaking of warranty
services by TYROLIT Hydrostress AG - in international sales under the
express exclusion of the warranty regulations of the UN law on sales of 11
April 1980 - the following conditions apply:
1. Any warranty claims must take place within 12 months from hand-
over. Any undertaking of warranty service does not extend this time
limit.
2. The system and/or any affected part(s) must be sent for repair or
replacement immediately a defect is discovered to TYROLIT
Hydrostress AG or a local authorised TYROLIT Hydrostress AG
branch office.
3. This warranty covers the free of charge repair or free of charge
replacement of defective parts. No undertaking of warranty over and
above this exists.
4. Parts that are normally subject to wear and tear are not covered by
this warranty.
For wearing parts regulations see "Chapter 6" 6.4,
6-9.
5. The warranty service is only undertaken provided that the system has
been correctly used, handled, serviced and cleaned in accordance
with the Operating Instructions and the technical integrity is
preserved, i.e. that only original TYROLIT Hydrostress AG
consumable material, accessories and spare parts have been used
with the system.
6. Further claims are excluded. In particular, TYROLIT Hydrostress AG
shall not be liable for direct or indirect damages, losses or costs
associated with the use of the system.
7. The warranty expires immediately if the system or only one individual
component of it is in any way converted, changed or modified.
8. Provided that a special written contract was concluded for the system,
any warranty agreements established therein shall apply. Any verbal
or implicit warranty agreements are invalid.