TYROLIT Hydrostress SK-SD, Operating Instructions & Spare Parts

Page: 65 / 66

Operating Instructions Servicing and Maintenance
SK-SD / 007 6-9
6.4 Wearing parts
6.4.1 Wearing part regulations
Wearing parts are those parts which are subject to operational wear and
tear when the machine is used correctly. A uniform definition of wear is not
possible as this will differ according to the intensity of use. Wearing parts
must be maintained, adjusted and, if necessary replaced differently for
each system according to the Operating Instructions of the manufacturer.
Operational wear and tear cannot justify a warranty claim.
Wear parts:
– feed and drive elements such as toothed racks, toothed wheels,
pinions, spindles, spindle nuts, spindle bearings, wire, chains, chain
wheels and belts,
– seals, cables, hoses, collars, connectors, couplings and switches for
pneumatics, hydraulics, water, electricity and fuel
– guide elements such as guide beads, guide bushes, guide rails,
rollers, bearings and anti-slip supports
– clamps of quick-release system
– flushing head seals
– friction and anti-friction bearings that do not operate in an oil bath
– shaft sealing rings and seals
– friction and overload couplings, brake device
– carbon brushes, collectors
– easy release rings
– adjusting potentiometers and manual control elements
– fuses and lamps
– auxiliary and operating resources
– anchoring elements such as dowels, tie bolts and screws
– floor coverings
– lamellas
– membranes
– spark plugs, glow plugs
– parts of the reversing starter such as starting cord, starting handle,
starting roller, starting spring
– sealing brushes, rubber seals, splash guards
– filters of all kinds
– drive and diverter rolls, bandages
– wire movement guards
– running and drive wheels
– water pumps
– cutting spoil transport rollers
– drilling, parting-off and cutting tools