TYROLIT Hydrostress SK-SD Operating Instructions & Spare Parts Download Page 10

Page: 10 / 66

Product description

Operating Instructions

1-2

SK-SD / 007

1.1.2

Application

The wire saw SK-SD is designed and built for the following application:

• Cutting concrete (including reinforced concrete) and natural stone, for

other materials please contact us.

• Cutting of parting cuts, flush cuts and angle cuts in ceilings, floors or

walls.

• The wire saw SK-SD should only be used and operated with the author-

ised anchoring systems.

• Only original TYROLIT cutting tools, diamond wire connectors and ac-

cessories should be used.

The applicable mandatory limitations on use and parameters are contained
in Chapter 1 "Technical Data" 1.2,

1-4.

1.1.2.1

Safety measures

Any use other than for the intended purpose (see Chapter 1.1.2,

1-2)

constitutes abuse or misuse.

1.1.3

Name plate

Fig. 1-2

Name plate

Summary of Contents for SK-SD



































































Search results

Summary of Contents for SK-SD

Reviews:

Related manuals for SK-SD

Brands by name

Popular brands

TYROLIT Hydrostress SK-SD, Operating Instructions & Spare Parts

Search results

Summary of Contents for SK-SD

Reviews:

Related manuals for SK-SD

Brands by name

Popular brands