14
set to “ON”, the switch is reverse switch
at sewing and is stitch correction switch
at stop.
A05
Stitch
correction with
double button
ON~OFF
ON
When set to “ON”, enable the reverse
and stitch correction switch both are
valid. When set to “OFF”, disable the
double key be valid at the same time,
and in this mode, the function of the
single switch is determined by
A04
.
A06
Trimming (for
free sewing
mode)
ON~OFF
ON
When it is “ON”, enable the trimming of
free sewing mode.
A07
Wiping ON~OFF
ON
When it is “ON”, enable the wiping.
When
A06
is “OFF”,
A07
is invalid.
A08
Foot lift
ON~OFF
ON
When it is “ON”, enable foot lift. Whether
the foot SOL to be connected is detected
during power on automatically.
A09
clamp
ON~OFF
ON
“ON” to enable clamp, only for GC6280.
A10
Unfasten ON~OFF
OFF
“ON” to enable unfasten SOL, only for
GT655D.
A11
Trimming (for
bar tacking
mode)
ON~OFF
ON
When it is “ON”, enable the trimming of
bar tacking mode.
A12
Screen saver
ON~OFF
ON
“ON” to enable screen saver function.
A13
Puller
ON~OFF
ON
“ON” to enable puller function.
A14
Trimming
protection
ON~OFF
ON
When it is “ON”, the pedal must be back
to the balance
position to do next
operation after trimming, “OFF” to be no
required.
A15
Foot lift after
trimming
ON~OFF
OFF
When
A08
is “ON”, if
A15
is set to “ON”,
the foot lifter will lift automatically after
trimming.
A16
The first
segment keep
on with the
ON~OFF
ON
It is valid only for constant-stitch sewing.
If enable automatic sewing mode and set
the start tacking, the next segment of