9
5.3 Program mode
¾
If
is enable, then the mode is program mode.
¾
Change “Seg” parameter to select the segment which wants to setup.
¾
Each segment can use
or
to enable or disable the start
tacking.
¾
Each segment can use
or
to enable or disable the end
tacking.
¾
Each segment can change “Sti” parameter to set the stitch.
¾
Each segment can use
to set the needle position after stop.
¾
Each segment can use
to enable or disable the trimming
function.
¾
Turning wheel button clockwise or anticlockwise to move the cursor,
push wheel button to twinkle the parameter want to modify, then
turning wheel button clockwise or anticlockwise to change parameter,
push wheel button to save the change, or push
to cancel
change.
