TYM TX753, User Manual

Page: 79 / 180

2 - 28
2 - 29
2
2 - 28
2 - 29
DESCRIPTION OF OPERATING SYSTEM
(12) Draft/Plowing depth control knob
Draft control mode
- turning counterclockwise:
higher sensitivity
- turning clockwise:
lower sensitivity
Plowing depth control mode
(Optional)
- turning counterclockwise:
shallow
- turning clockwise: deep
(13) highest position setting knob
It is used to set the highest position
of the lift arm.
- Turning counterclockwise: lowering
- Turning clockwise: lifting
(14) lowering speed control knob
It is used to control the lowering
speed of the lift arm.
- Turning counterclockwise: slower
- Turning clockwise: faster
- : lowering operation disabled
(10) Position control lever
Push the lever to lower the lift
arm, and pull the lever to raise
the lift arm.
(11) lowest position setting knob
Press and turn the knob to set
the desired lowest position.
민감 견인 둔감
얕음 경심 깊음
위치
견인
경심
80C111B
(20) Position/Draft/Plowing depth
control mode selection button
Press this button to select the
desired mode among the position,
draft and plowing depth control
modes. The position control
indicator
①
, draft control indicator
②
or the plowing depth control
indicator
③
is illuminated according
to the selected control mode.
10 11 A 12 1 1
1
2
20
5
Position
Draft
Depth
Manual
Flat
Slope
Sensitive
Standard
Dull
Upper
Lower
Horizon. MNL
TX753,TX853-영문-02(나).indd 29 2014-04-23 오후 4:57:54