TYM TX753, User Manual

Page: 74 / 180

2 - 2
2 - 25
DESCRIPTION OF OPERATING SYSTEM
2 - 2
2 - 25
80C108B
1 2
< Remote hydraulic valve coupler >
1) how to connect coupler
①
Clean the couplers on the
tractor and implement thor-
oughly.
②
Remove the dust cover from
the tractor side. Then, fit the
male coupler on the imple-
ment side while moving its ex-
ternal ring backwards slightly.
③
Pull the male coupler on the
implement side backwards
slightly to check its firm en-
gagement.
80C107A
2 1
(3) External hydraulic pressure
control lever
To use a an implement (rotavator,
hydraulic plow, etc.), connect its
hose to the valve port A, B or C ac-
cording to its use.
1.
lever operation → Hydraulic
pressure is applied to the valve
port 1.
2. lever operation → Hydraulic
pressure is applied to the valve
port 2.
. lever operation → Hydraulic
pressure is applied to the valve
port .
2) how to disconnect coupler
①
Lower the implement on the
ground to release pressure in
the hydraulic hose.
②
Stop the engine and operate
the remote hydraulic lever 2 -
times to remove any residual
pressure in the hose.
③
Disconnect the male coupler
on the implement side while
pulling the external ring of the
coupler on the tractor side
backward slightly.
④
Remove oil and dust from the
coupler and block the dust
cover.
To prevent a burn and skin
damage, make sure to stop the
engine before connecting or
disconnecting the coupler.
Do not use your hands to check
for oil leakage.
•
•
WARNING
TX753,TX853-영문-02(나).indd 24 2014-04-23 오후 4:57:46