Illustra Pro Series 5MP, 3MP & 2MP Mini Dome Series
5
2. Preparing the Camera for Installation
Figure 1
Remove camera from the box
Take care when removing the camera from the box.
1. Remove the camera from the box.
2. Using the supplied security torx key, loosen (but do not remove) the three cover screws from
the bubble assembly.
3. Remove the camera liner.
4. Loosen the three screws marked with a triangle on the camera assembly as seen in Figure 2.
Figure 2
5. Remove from the Enclosure Base Assembly.
Enclosure Base Assembly
Camera Assembly
Camera Liner
Bubble Assembly
