Illustra Pro Series 5MP, 3MP & 2MP Mini Dome Series
8
DIP Switches:
o
PAL/NTSC system switch, default is NTSC.
o
Future Enhancement.
o
IR On/Off, default is on.
Use a suitable small tool to operate the switch.
NOTE:
After switching the video system mode from NTSC to PAL or vice versa, you have to reboot the
camera for the change to take effect.
Micro SD Card:
Micro SDHC card slot.
NOTE:
micro SD Card is not available on LT camera models.
Defaults:
o
Reboot Request:
Press and hold for between 5 to 14 seconds to restart the camera.
o
Hardware Factory Default:
Press and hold for more than 14 seconds to restart and restore
the camera to factory defaults.
Video Out:
Analog video output to the video input of a monitor. The Illustra video cable should
be fed through from the rear of the camera assembly. Ensure that the cable is kept taut.
Analog Video Out
Phone Home
(Future Enhancement)
Reset/Defaults
PAL
IR (On/Off)
Future
Enhancement
micro SD Card slot
(not visible in this image)
Note:
micro SD Card is
not available on LT
camera models
NTSC
Figure 4
