Illustra Pro Series 5MP, 3MP & 2MP Mini Dome Series
7
*Alarm in-2
*Alarm Out
*Audio IN
3. Connect the cables and make adjustments
*Not available on LT camera models
AC Power:
Connects to AC 24V power adapter. If you are to use power from Ethernet connection,
this connector is not used when the power is provided by PoE.
PoE Network Port:
Connects to the LAN port of a standard 10Base/100Base-TX device, e.g.,
hub, switch or router.
Audio In:
Connects to an external microphone. This feature is not available on the LT camera
model.
Audio Out:
Connects to speaker. This feature is not available on the LT camera model.
Alarm In 1 & 2:
Connects to devices that trigger alarm signals. Up to two 2 input devices can be
connected. This feature is not available on the LT camera model.
Alarm Out:
Connects to device that responds to alarm signals, such as buzzers or lights. This
feature is not available on the LT camera model.
GND:
Ground
NOTE:
To connect the Audio In/Out, Alarm In/Out or GND wires, press the relevant spring terminal tab inward
using an appropriate small tool and insert the wire into the opening. Then release the tab to secure the
wire.
AC Power
PoE Network
Port
*Alarm in-1
*Audio Out
GND
Figure 3
