5
4.1.3 Prepare the cable according to the drawing, Strip and clean
the cable over a length of 1800 mm. and cut the strength member at
60 mm length.
For slotted core cable only
4.1.3.1 Install a protection tube of 150 mm. over the fibers of each slot
and slide the tube into the slot of the cable.
4.1.3.2 Protect the transition from the cable to the tubes with a few
layers of Teflon tape.
4.1.3.3 Consider the protection tubes now as loose tubes in the
installation.
4.2.1. Pull the cable back in the correct position, the cable jacket
should protrude 30 mm into the box passing the cable strapping point.
4.2.
Cable termination
60 mm
1800 mm
