FIST-MB2-T
I N S T A L L A T I O N I N S T R U C T I O N
Medium Box for Cable Termination
1 Introduction
1.1 Product description.
2 General
2.1 Tools
2.2 Kit contents
3 Installation and pre
assembling of box
3.1 Preparation of box
3.2 Opening of the ports.
3.3 Installation of wrap around groove
plates
3.4 Installation of the splicing trays
3.5 Mounting of the box on the wall
4 Cable installation
4.1 Cable preparation
4.2 Cable termination
4.3 Routing of the cable fibers
5 Pigtail installation
5.1 Installation pigtails with connectors
5.2 Installation of pigtails with Kevlar termination
5.3 Pigtail routing to the splicing trays
5.4 installation of the pigtail seals
6 Fiber organisation after splicing
7 Closing the box
8 Important steps
9 Rearrangements
Contents
1
Introduction
1.1
Product Description
The FIST-MB2-T is a Generic Box for a fiber management system that offers the function of splicing and patching.
It provides a mechanical and environmental protection for all the fiber optic components and permits easy
access by both the network provider and the customer. The box is applicable indoor and inside street cabinets.
The FIST-MB2-t box is designed to terminate, and patch fibers, it can handle up to 16 connectors.
2
General
2.1
Tools
Hammer
Screwdriver
Marker
Fiber guiding pin
FACC-tube-cutter-01
to cut loose tubes
FIST-GB-CUT-TOOL-PG16
to cut holes for glands
FACC-TUBE-Stripper-02
to strip loose tubes
FACC-HEAT-GUN-220V or 110V 1460W hot air gun
to install the heatshrink cable seals
