TYAN THUNDER LE-T, User Manual

Page: 40 / 63

40
http://www.tyan.com
( Reserved Memory
Address continued)
CC000
D0000
D4000
D8000
DC000
Disabled
3.5 Boot
Options related to boot devices can be altered through the following.
Boot Device Priority
1st Boot Device
2nd Boot Device
3rd Boot Device Settings for boot priority.
Boot Device
Removable Dev.
Hard Drive
ATAPI CDROM Changes the order of boot
device.
Hard Disk Drive
Default: Onboard IDE
Onboard IDE
FastTrak ATA-100/RAID Specifies the boot
sequence for hard drive
booting. This option will
show all storage devices.
Removable Devices
Options dependant on
System but most of the
time it will be the FDD..
3.6 Power Management Setup
All ACPI/APM options disabled.
3.7 Security
Options related system security can be altered through the following.
Change Supervisor
Password
Changes system
password.
Change User Password Changes boot password.
Clear User Password Clears boot password.
Boot Sector Virus
Protection
Default: Disabled
Enabled
Disabled Toggles protection of boot
sector on the hard drive
from being modified.
3.8 Exit
Options related to exiting and saving the BIOS can be altered through the following.
Exit Saving Changes
OK
Cancel Exit BIOS Setup and save
changes.
Exist Discarding Changes
OK
Cancel Exit BIOS Setup and
ignore changes.
Load Optimal Defaults
OK
Cancel Loads all BIOS defaults for
optimal performance.
Load Failsafe Defaults
OK
Cancel Loads all BIOS defaults for
stable performance.
Discard Changes
OK
Cancel Reset all changes to
previous state.