TYAN THUNDER LE-T, User Manual

Page: 9 / 63

9
http://www.tyan.com
2.2 CMOS Reset (JP1)
If you have been locked out of your system because you forgot your password, or set the CMOS
incorrectly, or have just finished flashing your BIOS, you will need to reset the CMOS. The
instructions are as follows:
1. Power off the system
2. Close J58
3. Wait about three seconds
4. Open J58, then power on the system again
By following this procedure, you will erase your password and reset the CMOS. The location of
J58 is shown in the diagram below.
J58
OPEN
Normal
* default is OPEN
OPEN
Normal