TYAN THUNDER LE-T, User Manual

Page: 13 / 63

13
http://www.tyan.com
2.6 FAN Connectors* (FAN1, FAN2, FAN3, FAN4, FAN5, FAN6)
These FAN connectors can be used to install cooling devices. FAN1 and FAN2 are for CPU1 and
CPU2, respectively.
m
Also refer to Page 15 for which connector belongs to which CPU.
FAN # Source Specifications
CPU FAN 1 MOS 1.2A Max
CPU FAN 2 MOS 1.2A Max
Chassis FAN 3 J76
12V J76: Open
1.2A J76: Closed
Chassis FAN 4 MOS 1.2A Max
Chassis FAN 5 12V Directly receives 12V
Can support >1.2A
Chassis FAN 6 12V Directly receives 12V
Can support >1.2A
FAN Pinout
GND +12V
SPEED
2 3
FAN2
FAN1
FAN3
The FAN connectors, with the exception of FAN5 and FAN6 are 12V at
1.2A and only support cooling fans below or up to that rating . Tyan
takes no responsibility and will not be held liable for damage related to the
misuse of these fan headers.
NOTE
FAN4
FAN5
FAN6
FAN Specifications
Voltage
Amperage
12V
1.2A
* For hardware monitoring information related to FAN1, FAN2, and FAN3, please check the
Hardware Monitoring section.
J76
1