TYAN THUNDER LE-T, User Manual

Page: 37 / 63

37
http://www.tyan.com
Boot up Num-Lock
Default: On
On
Off Specifies whether Num-
Lock will be on or off
during bootup.
Boot up CPU Speed
Default: High
High
Low Specifies the CPU speed
during startup.
ATAPI Detect Time Out
Default: 35
0, 5, 10, 15… 35 Selects the amount of time
before ATAPI device
detection stops.
PS/2 Mouse Support
Default: Enabled
Enabled
Disabled Toggles the use of the
PS/2 mouse port.
Typematic Rate
Default: Fast
Fast
Slow Changes speed of key
repeat rate.
System Keyboard
Default: Present
Present
Unavailable Will allow continual boot if
the keyboard is not
attached.
Primary Display
Default: VGA
VGA
BGA Changes default video
mode. Leave as is.
Parity Check
Default: Disabled
Enabled
Disabled Toggles checking of
system memory for
corruption.
Boot to OS/2
Default: No
Yes
No Toggles boot to OS/2 OS.
Leave as default.
Wait for F1 if “error”
Default: Enabled
Enabled
Disabled If Enabled, you will have to
press F1 for the system to
continue booting if an error
is detected during POST.
Hit “Del” Message
Default: Enabled
Enabled
Disabled Toggles display of pressing
DEL key to enter BIOS.
Internal Cache
Default: Write Back
Write Back
Page Flip Leave as default.
3.2-E Onboard Device Configuration
Options related to onboard devices can be altered through the following.
Power Button 4
Seconds Off
Default: Enabled
Enabled
Disabled By default, you have to
hold the power button for 4
seconds in order to shut off
the system.
Power Lost Control
Default: Always On
Previous State
Always Off
Always On When set to Always On ,
the system will
automatically turn on.
Onboard SCSI
Default: Enabled
Enabled
Disabled Toggles the onboard SCSI
controller.
Onboard 82559 (1)
Default: Enabled
Enabled
Disabled Toggles Network onboard
NIC 1.
Onboard 82559 (2)
Default: Enabled
Enabled
Disabled Toggles Network onboard
NIC 2.
Onboard Promise IDE
Controller
Default: Enabled
Enabled
Disabled Toggles the use of the
onboard Promise
RAID/ATA-100 controller.