8 |
P a g e
CLEANING & MAINTENANCE
–
T
WIN
E
AGLES
G
AS
P
OWER BURNER
STAINLESS STEEL
The T
WIN
E
AGLES
Power Burner is made of stainless steel construction. It is non-rusting and non-
magnetic. Never clean the stainless steel when it is hot. After the initial cooking use, certain areas of the Power
Burner may discolor. This is a normal discoloration caused by the intense heat given off by the burner. Specks of
grease can gather on the surface of the stainless steel and get baked-on. These can be removed by using a mild
abrasive pad (like Scotch Brite) with a stainless steel cleaner. Use the mildest cleaner and always scrub in the
direction of the grain.
Do not use steel wool to clean the Power Burner. Do not use abrasives on the polished highlights. Be
extra careful when cleaning around the highlights. Metal polisher or mild chrome cleaner can be used to bring
back the luster on highlights. To touch-up minor scratches in the stainless steel, sand the affected surface very
lightly, with 100-dry grit emery sandpaper in the direction of the grain.
DRIP PAN
The drip pan collects grease, liquid and fallen food particles.
Allow the pan and its contents to cool before cleaning. Slide the pan out
and wipe it clean. Make sure the drip pan is fully inserted back into the
Power Burner. It is highly recommended to clean the pan after every use
to avoid any possibility of a grease fire. DO NOT use the Power Burner
without the drip pan pushed all the way to the back of the Power Burner
unit.
POWER BURNER GRATE
(a)
Round Grates
The easiest way to clean the grates is to scrub them with a
barbeque brush immediately after cooking is completed and the flame is
turned off.
Wear a barbeque mitt to protect your hands from the heat and
steam. Dip a brass bristle barbeque brush in tap water and scrub the hot
grates. Dip the brush frequently in tap water. Steam, created as water
comes in contact with the hot Power Burner, helps loosen food particles
stuck in the Power Burner. These food particles will either get burned or
fall into the cleaning pan. Cleaning of the Power Burner would be
longer and more difficult if the Power Burner grates are allowed to cool
before cleaning.
(b) Heavy Duty Grate
Use warm water and soap to clean the heavy duty grates. Use
non-abrasive sponge to clean off the food particles.
BURNERS
Burners are made of heavy gauge brass and can be cleaned using
a bristle brush, warm water and soap. Check every port hole for clogs.
Use a wire pin to clean out clogged ports. Make sure the burner is dry
before installing it back to the Power Burner.
a
b
