16
5
Connecting Equipment to the CORIOmaster
The CORIOmaster has DVI-U input and Output connectors. DVI-I Signals can
be connected directly using DVI-I cables. Due to the large number of connecters
that may be connected the user is requested to use fully screened Cables with
built in Ferrite chokes to meet the emission standards.
For HDMI, Composite video or analogue signals TVOne can supply appropriate
adaptors that can be fitted to the DVI-U connector.
Below is a diagram of the rear of the unit. DVI-U cards can be placed in slots 1
to 16.
The input cards are identified as black painted with white writing. It is
recommended that these are placed in unit from the top of the in slot 1,
increasing in number.
It is recommended that the output cards are placed from slot 16, decreasing in
number.
The output cards can be either scaling or non-scaling. The non-scaling are
painted grey with white writing the scaling are painted white with black writing.
The non-scaling cards only permit format conversion of the connected input.
There is no aspect ratio conversion or gen lock capability.
The scaling outputs are required if and resolution conversion is required. The
scaling outputs also permit gen-locking to a separate input.
