41
If the user presses yes the unit will change to output resolution to match that of the
Genlock Source.
The user can then try again to lock the output by first enabling genlock and then pressing
the Take button to force the genlock to occur. If the signal is not present the system will
report a “data synchronisation failed” and the user should investigated the problem with
the genlock source.
This operation should be repeated for all outputs that are to be genlocked. Outputs can be
genlocked to different sources to provide a very flexible system.
10.8 HDCP
The DVI inputs and outputs are fully compliant with HDCP. This however can cause
serious operational issues.
On each DVI Input the user has the ability to disable HDCP communications with the
source. This is strongly recommended to be used when connecting to a computer that has
HDCP capability but will not be playing out protected material. Otherwise the channel will
become encrypted and limit system functionality.
On Outputs the user can set the HDCP Downsteam to Hold On or Keep Off. (Follow
Sources is not recommended for this version). Keep Off disables HDCP key transfer and
is recommended for non-compliant sinks. Hold On is used for compliant monitors and
projectors.
For correct operation with an HDCP Source ALL outputs connected to that source
must be HDCP Compliant.
In the case of the CORIOmaster if one or more windows used on a canvas comes from an
HDCP encrypted source then all outputs linked to the Canvas must be HDCP compliant. If
not then no output image will occur.
