Page 22
o
When adjusting a parameter and the cursor is blinking on
“SET” or “EXIT” the
UP
▲ key activates that procedure.”
DOWN key
This key has the following functions:
In the menu directories:
o
This key enables the operator to browse through the cycles.
In the directories available:
o
When the cursor is blinking on a number, the
DOWN
▼ key
decreases its value.
o
When the cursor is blinking on menu selection, the
DOWN ▼
key allows browsing forward through the menu.
o
When adjusting a parameter and the cursor is blinking on
“SET”
or
“EXIT”
the
DOWN ▼
key activates that procedure.
START/STOP key
This key has the following functions:
In the main screen:
o
Starts the process when the required program was chosen.
o
Stops the current process.
o
Cancels the ERROR message displayed on the screen and
opens the electric door lock.
In the menu directories:
o
When the cursor is blinking on a number, the
START/STOP
key enables moving to the next position.
o
When the cursor is blinking on a menu selection, the
START/STOP
key activates that selection.
4.2.3 Printer
The printer is an optional device.
It prints the detailed history of each cycle performed by the autoclave.
The printing is on thermal paper with 24 characters per line and
records the sterilization cycle information for subsequent consideration.
4.3 Displayed Error Messages / Symbols
The failures are divided into two categories
.
1.
Failure that occur before completing the sterilization stage, which in
this case will leave the load unsterilized
2.
Failure that occur after completing the sterilization stage, which in this
case will leave the load sterilized
For the list of Displayed Error Messages / Symbols
see
TROUBLESHOOTING
Summary of Contents for 2840 ELG-D
Page 2: ...https tuttnauer com...
Page 19: ...Page 17 ON OFF On Off LAB048 0018 Near the Power switch...
Page 89: ...Page 87...
