Enter the battery memory program, you can change the battery
type(Lipo, Lilo, LiFe, NiMH, NiCd, Pb battery), voltage, charge
current by pressing the Start/Enter button to make the value blink,
the INC or DEC buttons to change the value, and Start/Enter
button once more to store the value and move to the next value or
screen. (Note: The battery used for this example is a 2S(7.4V) Lipo
battery.
Set the voltage and number of cells, along with the normal voltage
(1-8S).
Set the charge current, which can be adjusted(0.1-40.0A).
18 ·
BATTERY MEMORY SET
The charger can store up to 10 different charge/discharge profiles for your convenience,
and the stored profiles can be recalled quickly without having to go through the setup
process.
BATT MEMORY
【
1
】
ENTER SET
BATT TYPE
LiPo
BATT VOLTS
7.4V(2S)
CHARGE CURRENT
4.9A
ENTER
START
DEC INC
＞
3 seconds
DEC INC
DEC
INC
DEC INC
DEC
INC
DSCH CURRENT
2.2A
Set the discharge current, which can be adjusted(0.1A-8.0A,
each port).
DSCH VOLTAGE
3.0V/CELL
Set the discharge voltage, which can be adjusted(3.0V/CELL-
3.3V/CELL).
TVC=YOUR RISK
4.20V
Set the terminal voltage, which can be adjusted(4.18v-4.30v).
DEC INC
DEC
INC
DEC INC
DEC
INC
DEC INC
DEC
INC
TEMPERATURE
CUT-OFF 50C
DEC INC
DEC
INC
Set the
temperature, which can be adjusted(20C-80C).
cut-off
Turnigy Mega 1000W
