background image

We guarantee this product to be free of manufacturing and assembly defects for a period 
of  one  year  from  the  time  of  purchase.  The  warranty  only  applies  to  material  or 
operational defects, which are present at t he time of purchase. During that period, we will 
repair  or  replace  free  of  service  charge  for  products  deemed  defective  due  to  those 
causes.

You will be required to produce proof of purchase (invoice or receipt). This warranty is not 
valid for any damage or subsequent damage arising as a result of misuse, modification or 
as a result of failure to observe the procedures outlined in this manual. 

Warranty and service

WARRANTY AND SERVICE

28 ·

This charger is designed and approved exclusively for use with the types of battery stated 
in this Instruction Manual. Hextronik accepts no liability of any kind if the charger is used 
for any purpose other than that stated.
We  are  unable  to  ensure  that  you  follow  the  instructions  supplied  with  the  charger,  and 
we have no control over the methods you employ for using, operating and maintaining the 
device. For this reason we are obliged to deny all liability for loss, damage or costs which 
are  incurred  due  to  the  incompetent  or  incorrect  use  and  operation  of  our  products,  or 
which are connected with such operation in any way.Unless otherwise prescribed by law, 
our obligation to pay compensation, regardless of the legal argument employed, is limited 
to  the  invoice  value  of  those  Hextronik  products  which  were  immediately  and  directly 
involved in the event in which the damage occurred.

Liability exclusion

Turnigy Mega 1000W

Summary of Contents for MEGA 1000W






























Reviews: