19
85812
TO STORE THE WIDESPIN 1530 TM OVER AN
EXTENDED PERIOD
, perform a complete inspection.
Refer any needed service or repair to service level
personnel. Clean the hopper, both sides of the conveyor
belt and completely clean the spinner assembly. Use
low pressure wash on the top dresser, DO NOT use
high pressure wash. Apply a film of light machine oil to
the spinner wheels to control rust. Release the tension
of the conveyor belt. To protect the conveyor belt,
rubber and plastic parts, store the WideSpin 1530 TM
out of direct sunlight.
Storage
Operator Level Adjustment and Service
TO RETURN TO SERVICE AFTER EXTENDED
STORAGE
, inspect the entire machine for any damage
that may have occurred during storage. Refer any
needed correction to service level personnel.
Reset the tension of the conveyor belt. Refer adjustment
to service level personnel.
Perform a complete lubrication procedure. Refer any
needed service or repair to service level personnel.
TO AVOID SERIOUS INJURY,
Do Not Attempt To Adjust, Inspect, or
Service any Part of the WideSpin 1530
TM When It Is Operating.
Be Aware of High Hydraulic Oil
Temperatures. Serious Burns and Injuries Are
Possible.
Properly Secure The WideSpin 1530 TM Before Starting
Any Inspection, Service or Adjustment Procedures.
Operator Level Adjustment and Service
is limited to:
● Cleaning
● Inspection
● Storage
Refer all other service, adjustments or
repairs to qualified service personnel.
HYDRAULIC FLUID
The hydraulic fluid in the WideSpin 1530 TM top dresser
is supplied by the truck. When refilling the truck, check
the type of fluid used (vegetable or petroleum based).
CLEANING
Wash the excess top dressing material from the
conveyor belt, hopper and spinner assembly. Wash
excess top dressing material from all components on
the bottom of the top dresser, especially the inside
surface of the conveyor belt and the conveyor belt
rollers. Use only low pressure wash to clean the top
dresser.
After extended periods of use, the spinner wheels may
collect a buildup of top dressing material. This buildup
may cause excessive vibration or poor spreading
results. During operation, periodically inspect and
remove any buildup of top dressing material from the
spinner wheels, the spinner assembly deflectors, the
guards, and the shields.
INSPECTION
After the WideSpin 1530 TM has been cleaned, inspect
for damage. Look for loose or missing hardware.
Inspect the spinner wheels for loose or missing vanes.
Visually inspect for hydraulic leaks on the motors,
hoses and the hydraulic fittings. Refer any needed
repair work to qualified service personnel.
TO AVOID SERIOUS INJURY,
Do Not Use Your Fingers Or Hands
To Check For Hydraulic Leaks. High
Pressure Leaks Can Puncture The
Skin And Force Oil Into The Body.
This Can Cause Severe Injury Or
Death.
WEAR SAFETY GLASSES!!
EUROPEAN LUBRICANTS, FUEL, AND PARTS
DISPOSAL NUMBERS
Motor Oil ........... 54112
Gear Oil ............ 54112
Grease .............. 54202
Plastic Parts ...... 57127
WARNING
DANGER
OPERATION
