32
85812
If the spinner assembly is removed, the WideSpin
1530 TM can be used as a material handler for top
dressing material. With the spinner assembly removed,
top dressing material will drop out of the back of the
unit and not be spread. Material handling rates are
adjustable by using the metering gate and the conveyor
belt speed control.
Use the following steps to remove the spinner assembly.
Refer to Figure 17:
Step 1.
Turn the WideSpin 1530 TM spinner speed
control back to “Zero”.
Step 2.
Remove the deflector from the rear of the
WideSpin 1530 TM.
Step 3.
Disconnect the spinner assembly’s two quick-
disconnect hydraulic hoses. One hose is connected
to the spinner assembly’s left spinner wheel motor,
the other is connected to the WideSpin 1530 TM
manifold valve block (located under the left side of
the frame, behind the conveyor belt speed control
knob).
Step 4.
Remove the 1/2” hex head bolts (quantity 4)
holding the spinner assembly to the WideSpin 1530
TM frame.
Step 5.
Lift the spinner assembly up and remove from
the rear member of the WideSpin 1530 TM frame.
Use caution not to bend or damage the small
hopper assembly located on the top of the spinner
assembly.
The spinner assembly weights 68 Kg
(150 pounds). Use proper lifting equipment and
techniques.
Step 6.
Pull the hydraulic hose that is hanging out of
the rear of the WideSpin 1530 TM back through the
hole in the frame. Connect the quick-release from
that hose to the manifold valve block. Connect to
the fitting on the block that was previous used by
the other spinner assembly hose.
Refer to the decal
on the rear of the WideSpin 1530 TM frame.
Step 7.
Replace the deflector to the rear of the
WideSpin 1530 TM.
Removal Of The Spinner Assembly
SPINNER
ASSEMBLY
PULL HYDRAULIC HOSE BACK INTO
FRAME AND CONNECT TO MANIFOLD
VALVE BLOCK
DISCONNECT
HOSE FROM
VALVE BLOCK
SPINNER
SPEED
CONTROL
SPINNER
ASSEMBLY
REMOVED
SPINNER
ASSEMBLY
MOUNTED
FIGURE 17
HOSE ROUTING
DECAL
(ON REAR OF
WIDESPIN 1530
TM FRAME)
REMOVE
REAR
DEFLECTOR
SV85811-10
SERVICE LEVEL MAINTENANCE
