12
85812
TO AVOID SERIOUS INJURY,
Read and Understand the Entire
Operator’s Manual Before Operating
The WideSpin 1530 TM and the Truck.
Read and Follow all Safety Decals and Warnings.
TO AVOID SERIOUS INJURY,
Always operate the WideSpin 1530 TM Top
Dresser Safely and Wear the Appropriate
Personal Safety Equipment.
TO AVOID SERIOUS INJURY,
Keep Hands, Feet, and Clothing Away From
Rotating Spinner Wheels
TO AVOID SERIOUS INJURY,
Do Not Allow Riders In or On The Top Dresser
WIDE
SPIN
1530 TM OPERATOR POSITION
The proper location for the WideSpin 1530 TM operator
is seated on the truck seat. Always stop the trucks
engine, set the trucks brakes, and disengage hydraulic
power to the conveyor belt and the spinner assembly
before leaving the trucks seat. Do not stand behind the
WideSpin 1530 TM when it is operating.
TO AVOID SERIOUS INJURY,
Always Operate the WideSpin 1530 TM From the
Operators Position at the Trucks Seat.
Always Stop the Trucks Engine, Set the Trucks
Brakes, and Disengage Hydraulic Power to the
WideSpin 1530 TM Spinners and Conveyor Belt
Before Leaving the Trucks Seat.
DO NOT Allow Anyone To Stand Behind the 1530
TM Spinner Assembly When It Is Operating.
WIDE
SPIN
1530 TM OPERATING SPEEDS
When the 1530 TM top dresser is mounted to the truck,
the
maximum ground speed of the truck should
not exceed 8 Km/h (5 MPH).
Safety concerns and
excessive stress on the truck and the top dresser will
occur if speeds are in excess of 8 Km/h (5 MPH).
Operation
TO AVOID SERIOUS INJURY
and To Avoid Damage to the truck and 1530 TM
top dresser, DO NOT Drive or Operate the 1530
TM Top Dresser At Speeds Over 8 Km/h (5 MPH).
The ground speed of the truck must be constant to
ensure an even and equal distribution of top dressing
material. The trucks engine speed must be maintained
to ensure a constant and even supply of hydraulic
power. Choose a gear and throttle/governor setting
that will give a maximum ground speed of 8 Km/h (5
MPH). If top dressing speed exceeds 8 Km/h (5 MPH),
poor and uneven top dressing application will result as
well as unsafe operating conditions. For best results,
the 1530 TM should be moving before the spinner
assembly is engaged.
WIDE
SPIN
1530 TM MAXIMUM ANGLES OF
OPERATION
Do not drive or operate the truck and WideSpin 1530
TM on side slopes over 15º degrees. Do not drive or
operate the truck and WideSpin 1530 TM up or down
slopes over 15º degrees. Do not drive or operate
the truck and WideSpin 1530 TM with an overfilled
or overloaded hopper. Tipping or rolling over of the
machine can occur.
TO AVOID SERIOUS INJURY
and To Avoid Damage to the WideSpin 1530 TM
Top Dresser and the Truck,
Do Not Operate on Slopes Over 15º Degrees.
LOADING OF HOPPER
The maximum hopper capacity is 0.54 cubic meters
(19 cubic feet). Maximum weight of the load in the
hopper is 816.5 Kg (1800 pounds). Never overfill or
overload the hopper. Overloading will create a safety
hazard and cause undue stress to the truck and top
dresser components. Overloading may also cause the
trucks tires to sink into the turf and leave tracks. Never
modify the hopper to hold extra top dressing. Do not
add side boards to the hopper. An overloaded hopper
will cause the top dresser to be top heavy or out-of-
balance, and will increase the possibility of the truck
and top dresser tipping or rolling over if operated on
too steep of a slope.
The hopper can be loaded with a small front end
loader, however do not drop the load into the hopper
from too high of a height. Slowly load the hopper to
avoid damage to the hopper and conveyor belt.
WARNING
WARNING
STAY CLEAR
WHILE
SPINNERS ARE
OPERATING
DANGER
WARNING
WARNING
OPERATION
