10
85812
Electrical Power Supply Connection:
The power
supply connection
[L]
is designed to be plugged into
the Electrical Power Supply Harness. The harness
is part of the mounting kit and is sized to fit the type
of truck being used to carry the WideSpin 1530 TM.
Electrical connection to the truck is at trucks battery. A
12 volt DC, negative ground power source is needed
to operate the hydraulic solenoids in the WideSpin
1530 TM hydraulic system. A 15 AMP fuse is located
in a holder on the positive (
+
) power connection of the
harness.
LOCATION AND DESCRIPTION OF THE WIDE
SPIN
1530 TM OPERATOR POSITION
Operator Position:
The proper location for the operator
of the WideSpin 1530 TM Top Dresser is seated in the
trucks seat. Always stop the trucks engine, lock the
brakes, and disengage the hydraulic power before
leaving the operator’s seat. Do not stand behind or
allow anyone to stand behind the WideSpin 1530 TM
top dresser when the spinner attachment is operating.
FIGURE 3
[ I ]
[J]
[L]
[M]
[M]
[N]
[O]
[R]
[Q]
[P]
DS85812-02
DESCRIPTION
