TURFCO Service Quick Tip
T3000i/T3100 Weekly Preventative Maintenance Checklist
Page
1 of 1
Questions? Call Turfco at 1-800-679-8201
T3000i/T3100 Weekly Preventative Maintenance Checklist
WHAT?
Weekly Preventative Maintenance for the
T3000i/T3100.
WHY?
Preventative maintenance.
Checklist
Ensure the unit has been maintained following the
T3000i/T3100 Daily Checklist Quick Tip
Grease all grease fittings on the machine
(FIGURE 1)
A.
2 Front Wheel fittings (2011 and newer units will not have
these fittings)
B.
2 Front wheel spindles (All model years will have these fittings)
C.
1 Front wheel pivot (All model years will have these fittings)
D.
1 Idler arm for drive belt tensioner pulley (T3100’s do not
have this fitting)
E.
1 Steering Arm (2016 & Newer Models)
Check and clean your engine air filter. To loosen debris, gently tap the filter on a hard surface. If
excessively dirty replace the filter.
Clean carb linkage, choke control, and governor spring. Blow off the area with air (brake cleaner
works as well) and then using a DRY LUBRICANT work the linkage back and forth
(FIGURE 2)
Check air pressure in tires and inflate to marked PSI on tire
Check your engine and transmission oil levels
Check Steering cable tension. Adjust both sides evenly if needed.
(See
T3000/T3000i Service Quick Tip
–
Steering Cable Adjustment)
Inspect belts for wear
Clean and inspect your Trim and broadcast nozzle. Do not use metal
objects to clean the nozzles as it can damage the tip and affect your
spray pattern.
Check all cables for smooth function (hopper gate, variable speed,
throttle, and trim guard cable)
Completed by:
___________ ________________________ _____________________________
Serial Number
Name
Signature
Date
This Quick Tip is only a guide, always refer to your Operators Manual
a
c
d
b
a
FIGURE 1:
a)2 Front Wheel Bearings, b) 2 Front Wheel
Spindles, c) 1 Front Axle, d)Idler Arm, e)Steering Arm
FIGURE 2