Remove outer
retainer w/ snap ring
pliers
Remove inner and
outers retainer rings
using a flathead
screwdriver to pop out
the tapered edge
Once tires are
removed push
bearings out by
tapping the back side
with a rod to work
them out
Inspect surface of spindle
shafts and clean. Apply a layer
of anti-seizure lubrication to
shaft & Reassemble
Make sure there is
enough clearance on
outter bearings to get
retainers back in groove
T3000/T3100 Bearing removal
Removal for inspection or replacement of front
wheel bearings on the T3000/T3100
Ensure retainers are
seated in their grooves
when reinstalling and
replace vinyl cap
1.
2.
3.
4.
5.
6.
