manualshive.com logo in svg

TURFCO 85804, Operator'S Manual

The TURFCO 85804 Operator's Manual is a comprehensive guide that allows users to fully understand and efficiently operate this exceptional product. With easy-to-follow instructions and detailed diagrams, this manual is available for free download at our website, providing users with a valuable resource to enhance their experience with the TURFCO 85804.

Share
Download
background image

2

All specifications, information, illustrations or photos in this manual are

based on the latest information at the time of printing. The right is reserved to make changes without notice.

Table of Contents

Product Identification ........................................................................................................................................3

Product Records ..............................................................................................................................................3

Specifications ...................................................................................................................................................4

Registered Trademarks and Patents ................................................................................................................5

How To Obtain Parts and Service ....................................................................................................................5

Recognizing Safety Warnings and General Safety Practices ..........................................................................6

Setup and Assembly -

 

Hopper Assembly and Installation ..........................................................................................................8

 

Metering Gate Assembly and Installation .............................................................................................10

 

Installation of Spinner Shield ...............................................................................................................11

 

Standard Straight Tongue and Optional 5th Wheel Hitch Assembly ....................................................12

 

Installation of Battery and Battery Cables ............................................................................................14

 

Attaching the WIDESPIN 1530 to the Tow Vehicle ..............................................................................15

Description - 

 

WIDESPIN 1530 Broadcast Top Dresser  ............................................................................................16

 

Intended Use and Function ..................................................................................................................16

 

Description of Lightspread and Heavyspread Settings ........................................................................17

 

Location and Description of the WIDESPIN 1530 Major Components ................................................17

 

Location and Description of the Operator Position ..............................................................................18

 

Location and Description of the WIDESPIN 1530 Engine and Operator Controls ...............................18

Operation -

 

Tow Vehicle and Tow Vehicle Hitch Requirements ...............................................................................20

 

WIDESPIN 1530 Maximum Angle of Operation ................................................................................... 20

 

WIDESPIN 1530 Operator Position ..................................................................................................... 20

 

Pre–Operation Check List .................................................................................................................... 21

 

WIDESPIN 1530 Warm-up Operation .................................................................................................. 21

 

Loading of Hopper ............................................................................................................................... 21

 

WIDESPIN 1530 Top Dresser Towing Speeds ..................................................................................... 21

 

Setting Operator Controls For Lightspread or Heavyspread Operations ............................................. 23

 

Setting WIDESPIN 1530 Metering Gate .............................................................................................. 23

 

Setting WIDESPIN 1530 Spinner Speed Control ................................................................................. 23

 

Setting WIDESPIN 1530 Heavyspread Diverter .................................................................................. 23

 

Adjusting Spinner Wheel Vanes ........................................................................................................... 24

 

Setting WIDESPIN 1530 Conveyor Belt Speed Control ...................................................................... 24

 

Hand Held Spinner and Conveyor Belt ON/OFF Switch ...................................................................... 25

 

Engine Speed During Operation .......................................................................................................... 25

 

Top Dressing Operation ....................................................................................................................... 25

 

WIDESPIN 1530 Shutdown and Unhitching ........................................................................................ 25

Operator Daily Inspection ............................................................................................................................... 26

Storage ........................................................................................................................................................... 26

Troubleshooting Table .................................................................................................................................... 27

Operator Level Service and Adjustment -

 

Lubrication ........................................................................................................................................... 28

 

Tire Pressure ........................................................................................................................................ 28

 

Cleaning and Inspection ...................................................................................................................... 28

 

European Lubricant, Fuel, and Parts Disposal Numbers ..................................................................... 28

Service Level Maintenance

 

Lubrication, Wheel Bearings ................................................................................................................ 29

 

Engine RPM Settings ........................................................................................................................... 29

 

Conveyor Belt Care, Conveyor Belt Scraper ....................................................................................... 29

 

Conveyor Belt Tension Adjustment ...................................................................................................... 29

 

Conveyor Belt Tracking Adjustment ..................................................................................................... 30

 

Hydraulic System ................................................................................................................................. 31

 

Electrical System ................................................................................................................................. 35

 

Removing Spinner Assembly ............................................................................................................... 38

 

Adjustment of Spinner Vanes ............................................................................................................... 39

 

Conveyor Belt Replacement ................................................................................................................ 40

Parts Lists....................................................................................................................................................... 42

Decals ............................................................................................................................................................ 66

TABLE OF CONTENTS

Summary of Contents for 85804





































































Reviews:

No comments

Related manuals for 85804

B&K 700 Calibration Manual preview
700
Brand: B&K Pages: 5
UNIA MX User Manual preview
MX
Brand: UNIA Pages: 62
R2 MT Series Instruction And Maintenance Manual preview
MT Series
Brand: R2 Pages: 20
Dakota Digital VHX-66F-BRO Installation preview
VHX-66F-BRO
Brand: Dakota Digital Pages: 5
YMC Pilot Manual preview
Pilot
Brand: YMC Pages: 49
OCENCO M-20.2 Instruction Booklet preview
M-20.2
Brand: OCENCO Pages: 48
Ocean Optics NE-1 Installation And Operation Instructions Manual preview
NE-1
Brand: Ocean Optics Pages: 6
Yazoo/Kees Z9 Commercial Collection System Z9A Installation Instructions preview
Z9 Commercial Collection System Z9A
Brand: Yazoo/Kees Pages: 3
Yazoo/Kees Z9 Commercial Collection System Z9A Operator'S & Parts Manual preview
Z9 Commercial Collection System Z9A
Brand: Yazoo/Kees Pages: 36
Lightolier Pendalyte 40472U Specification preview
Pendalyte 40472U
Brand: Lightolier Pages: 3
Sabo 45-220 Operator'S Manual preview
45-220
Brand: Sabo Pages: 76
Raymarine LIGHTHOUSE SPORT 3.18 Operation Instructions Manual preview
LIGHTHOUSE SPORT 3.18
Brand: Raymarine Pages: 162
involight LED MH368ZW User Manual preview
LED MH368ZW
Brand: involight Pages: 8
WalimeXPro VC-1000Q Instruction Manual preview
VC-1000Q
Brand: WalimeXPro Pages: 23
Aitchison SEEDMATIC PROFESSIONAL 8124A Manual preview
SEEDMATIC PROFESSIONAL 8124A
Brand: Aitchison Pages: 50
Troy-Bilt TB2044 Operator'S Manual preview
TB2044
Brand: Troy-Bilt Pages: 40
HAMPTON BAY HB-10521-HS Use And Care Manual preview
HB-10521-HS
Brand: HAMPTON BAY Pages: 20
ProLights EclPanel TWCJR4X1 User Manual preview
EclPanel TWCJR4X1
Brand: ProLights Pages: 56

Brands by name

Popular brands

Load more brands