12
SETUP AND ASSEMBLY
STANDARD STRAIGHT TONGUE AND HITCH
ASSEMBLY
(See Figure 7)
Step 17.
Insert the tongue and hitch assembly into the
front of the 1530 frame. Attach the tongue to the
frame with two 1/2” x 4-1/2” hex head screws, 1/2”
lock washers and 1/2” hex nuts.
Step 18.
Route the Control Box Wiring Harness along
the top of the tongue. Secure to the top of the tongue
with two black plastic tie wraps. Provide enough
slack in the cable next to the hitch to avoid binding
or pinching the cable during sharp turns.
Step 19.
Check for proper operation of the jack stand.
The jack stand should swivel and lock securely into
position. The hitch pin should be inserted into the
hitch.
PLASTIC TIE WRAPS
FOR MAIN WIRING
HARNESS
1/2" X 4-1/2" LONG HEX HEAD
SCREW WITH 1/2" LOCK WASHERS
AND 1/2" HEX NUTS
CONTROL
BOX
WIRING
HARNESS
STANDARD STRAIGHT TONGUE
AND HITCH ASSEMBLY
FIGURE 7
HITCH
PIN
JACKSTAND
AS85804-06
