V02.00 | 2021/11
77
8.3.4
Reading process input data with the DTM – measured value
The measured value function of the DTM enables the reading of the process input data.
Right-click the device (
01/Intern-Lx-4RFID-8DXP-OPC-UA
) in the project tree.
Click
Measured value
.
Select in the middle window the required channel.
a
The process input data is displayed in the window on the right-hand side. (example: the
device is in Idle mode. Error messages are not present.)
Fig. 67: DTM – reading out measured values
