Setting
Setting RFID interface parameters via the DTM
76
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | [email protected] | www.turck.com
8.3.3
Evaluating diagnostics with the DTM
The diagnostics function of the DTM enables the diagnostics of all channels and general mod-
ule diagnostics to be called.
Calling channel diagnostics
Right-click the device
(01/Intern-Lx-4RFID-8DXP-OPC-UA)
in the project tree.
Click
Diagnosis
.
Select in the middle window the required channel.
a
The diagnostic data is displayed in the window on the right-hand side (example: no dia-
gnostic messages are present for RFID channel 0).
Fig. 65: DTM – channel diagnostics
Calling module diagnostics
Right-click the device in the project tree
(here:
192.168.1.100/TBEN-L5-4RFID-8DXP-OPC-UA
).
Click
Diagnosis
.
a
The diagnostic data is displayed in the window on the right-hand side (example: no dia-
gnostic messages are present for the module).
Fig. 66: DTM – module diagnostics
