EN
BM 30
IS13/02 - 561291
4 - TRANSPORT AND HANDLING
Cap. 4 -
Pag. 3/3
THIS MANUAL IS PROPERTY OF
-
ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN
4.2 LIFTING
The machine has four lifting points and a lifting beam (FIG.08).
Hook the ropes to the lifting beam (FIG.08-REF.1) and to the four lifting points, ensuring to connect the shortest ropes to hooks
(FIG.08-REF.2) and the longer ones to hooks (FIG.08-REF.3).
Use the lifting beam to lift BM 30 only.
Do not use the lifting beam to lift any other load.
Check the lifting beam's integrity before using it, and replace it if required.
1
2
3
FIG.08
Lifting must happen fully respecting all lifting standards in force, equally the used means must be conform with
current standards and perfectly preserved. Personnel in charge of the lifting mean must be adequately trained
and enabled for its use.
Use approved hooks and ropes for lifting 2,000 kg.
Ensure no one is too close to the machine before lifting it.
Do not stand underneath the suspended load.
Avoid damaging the components by not lifting or lowering the machine with sudden movements.
Do not alter the connection point for the lifting hook.
Move the machine on flat surfaces only, avoid any slope to prevent danger of running over or crushing between
machine and fixed obstacles.
