![Turbosol Beton Master Operation And Maintenance Manual Download Page 48](http://html1.mh-extra.com/html/turbosol/beton-master/beton-master_operation-and-maintenance-manual_1181315048.webp)
8
MAINTENANCE
48/58
561270 - IS19/07 - EN
8.7
TO BE CARRIED BY QUALIFIED PERSONNEL
8.7.1 Maintenance after 50 hours
- Check the engine coolant level.
- Check and adjust the engine idling speed.
- Change the motor oil; use TOTAL RUBIA TIR 7400.
- Remove the plug (FIG. 67-REF. 1) and drain the oil.
- Put the oil drain plug back in, remove the refilling cap (FIG. 68-REF. 2), refill with oil and put back the cap. Check the level on
the dipstick. It should be near the maximum mark (FIG. 68-REF. 1).
- Replace the motor oil filter cartridge.
- Replace the fuel filter cartridge and screen.
- Clean the engine air filter.
- Check the valve clearance and adjust if necessary.
- Check the engine mountings and tighten if necessary.
- Check the tightness of the pumping sensors, the safety sensors and the BETON MASTER operation sensors (diesel fuel
level, hydraulic oil temperature, coolant temperature).
- Make sure there are no leaks from the engine.
- Check the tightness of the fittings in the hydraulic system.
- Check the tightness of the nuts and wheels.
- Adjust the brakes on versions equipped with vehicle towing gear.
1
1
2
FIG.67 FIG.68
8.7.2 Maintenance to be performed every month or every 125 hours
- Change the motor oil
• Use TOTAL RUBIA TIR 7400.
• Remove the plug (FIG. 67-REF. 1) and drain the oil.
• Put the oil drain plug back on.
• Remove the refilling cap (FIG. 68-REF. 2), refill with oil and put back the cap.
• Make sure the level shown on the dipstick (FIG. 68-REF. 1) is near the maximum mark.
- Clean the finned surface of the radiator with compressed air.
- Check the tension of the alternator belt.
- Check the battery: the tightness of the terminals, the level and density of the electrolyte (see engine instructions booklet).
Gas released by the battery is explosive. Avoid making sparks near the battery. Avoid contact of the
electrolyte with skin or clothing.
8.7.3 Maintenance to be performed every 250 hours
- Check the wear on the delivery flange and replace if necessary.
- Replace the motor oil filter cartridge.
- Clean the diesel fuel prefilter.
Summary of Contents for Beton Master
