Turbosol Beton Master, Operation And Maintenance Manual

Page: 21 / 58

INSTALLATION
5
561270 - IS19/07 - EN
21/58
5.3 CONCRETE PIPING FITTINGS
Make sure the fittings are clean and in good order at all times.
Check the rubber gasket (FIG.17-REF.1) is present and fully fasten the levers (FIG.17-REF.2) when connecting the piping
segments.
Lock coupling with safety pin to avoid inadvertent openings (FIG.17A-RIF.3).
1
2
3
3
FIG.17 FIG.17A
5.4 CONNECTIONS
5.4.1 Concrete grid and vibrator
- Connect the electric vibrator's plug (FIG.19-REF.1) to the machine socket (FIG.19-REF.2) located on the hydraulic tank.
Close the door after connection.
When pumping shotcrete you will need to use the shotcrete nozzle and the 15 mm slotted grid with the electric vibrator.
- Unscrew the shock absorber's anchoring bolts (FIG. 18.REF. 1).
- Remove the concrete grid, replace it with the shotcrete grid and fasten it to the shock absorbers using the bolts.
- Open the small door, connect the electric vibrator's plug (FIG. 19-REF. 1) to the machine's socket (FIG. 19-REF. 2) located on
the hydraulic oil tank and close the door.