turbofan E35C, Installation & Operation Manual, Page: 33 / 49

Controller Configuration
31
2. Calibrate the Probes
Press the ‘Select’ key to enter the
Parameters Screen.
Press 'Exit', 'Right' Function key to return
to the Menu Screen / Exit the Controller
Configuration Menu’s.
Used to Calibrate the Probes with the use of
a Calibration device with 1000 ohm RTD and
176°C.
The Probes are factory set and will not
require calibration.
Refer to Menu 1,
Item 1 to adjust the set temp offset.
Press the Select - Down key to scroll to
Item 3 - ‘Change to Timer / Change to
Shelf’.
3. Change to Timer / Change to Shelf
Determines whether to use ‘Timer’ or
‘Shelf’ identification on cooking screens.
Press the ‘Select’ key to change the options
from ‘Timer’ to ‘Shelf’.
Defaults to Shelf.
NOTE: If the display shows ‘Change to Shelf’,
pressing the ‘Select’ button will
change to the ‘Shelf’ Mode. The
display will then show ‘Change to
Timer’ mode.
Press the Select - Down key to scroll to
Item 4 - ‘Change to Serial / Change to
IR’.
4. Change to Serial / Change to IR
Configures control for RS232 or IR recipe
exchange.
Press the ‘Select’ key to change the options
from ‘Serial’ to ‘IR’.
Defaults to IR.
Press the Select - Down key to scroll to
Item 5 - ‘Change to ºC / Change to ºF’.
If ‘Change to Timer’ selected,
menu will show Timer
Symbol here in Menu’s.
If ‘Change to Shelf’ is selected,
menu will show Shelf Symbol
here in Menu’s.