Insert the square end of assembled rotisserie Spit into the round hole on the left side panel. Next
insert the pointed end of the Spit into the Motor as shown below. Place the Collar into the round
hole on the left side of your grill bowl, then tighten the Collar Thumbscrew. The Collar will stabilize
the Rotisserie during the cooking process and allows the Rotisserie Spit to turn smoothly. Plug the
Rotisserie Motor cord into an outlet and turn on to test.
5.
BEFORE rotisserie cooking you will need to remove the Warming Rack, Cooking Grid(s) and possibly
the Flame Tamer/Rack from your grill. When rotisserie cooking place a Cooking Pan under the food
to be cooked. This will capture the drippings and keep your grill clean of excess grease which could
cause a fire. Use caution when moving a Cooking Pan containing hot oils.
The Collar must always be used with this Rotisserie
25
Holding Forks
Spit
Thumbscrew
Collar
Motor
Slide the pointed end of the Spit through the piece of meat. Place the Holding Forks onto each end
of the Spit. Adjust spacing between Holding Forks to accommodate your food, then tighten the
Thumbscrews to keep the Holding Forks in position. Slide the Collar onto the square end of the Spit.
Do not tighten the Collar Thumbscrew until the Rotisserie is placed into your grill.
4.
Rotisserie Thumbscrew 1/4"x1/2"
Qty. 3
Part # S196G04084
Holding Forks
Rot. Thumbscrew
1/4"x1/2"
Collar
Spit
Rot. Thumbscrew
1/4"x1/2"
